2nd gen dime xover pipe

just bagged a second gen 2.2 ltr sonoma, it lays...had to cut out xover pipe that crosses over under the trans...took it to the muffler shop and the cat there said he cant do nothing with it cause theres no room except raise it like an inch but thats still too low...anyone have pics or can take pics what the muffler shop did with urs so i can show this moron, and he can do the same so this thing can lay out and get out of my shop?

those people are never up for a challange

but some 90s and u bends of tubing and make it your self you baged the truck so i know you have a welder

well...its not that, im wondering if this cat is just lyin, or being lazy or if everyone goes around the front of the motor by the oil pan and then crosses over or what?

its hard to find a good muffler shop. there is one in alvin tx that i went to and took the time to test fit everything. good luck its going to be a long process. make sure both motor mounts are good, if the one on passenger side is broke the motor will sag alot and the space you have to work with will be less.