K
need a little help
mitsu94
+1y
posted this on another thread but got no real answer. i bought a plasma cutter and it didnt come with a plug so i went and bought one but dont know what wires go 2 which post, pics not real good the wire colors are blue, green w/yellow stripe, and brown some one please help me want 2 start makin my new 4-link brackets thanks
pavementpunisher
+1y
when you open the plug up there should be:
Ground(usually the middle one) that goes to the green w/ yellow stripe, the other two should both be hot if it's 210-220V...shouldn't matter on those...if the plug is labeled neutral, then hook the brown up to that one and the blue to the other. If you're still not sure, run by Lowes or Home Depot and talk to their electrical guy.
Ground(usually the middle one) that goes to the green w/ yellow stripe, the other two should both be hot if it's 210-220V...shouldn't matter on those...if the plug is labeled neutral, then hook the brown up to that one and the blue to the other. If you're still not sure, run by Lowes or Home Depot and talk to their electrical guy.
bdydrp18
+1y
make sure it is a 210v first?? then go with would joe siad that should be right.
mitsu94
+1y
yea def a 220v thanks 4 the info