Body Dropped Trucks?????

Edited: 2/2/2007 1:45:26 PM by mmautoworks

YOU COULD USE SCREW JACKS LIKE A MOTERHOME THAT WOULD WORK CAUSE THE INDY CARS ARE AIR OPERATED AND IF YOU HAD AIR FAILURE YOU WOULD BE IN THE SAME BOAT NAWIMEEN

Edited: 2/2/2007 2:44:00 PM by MagicMikey

i used a fork lift once.i had a air line blow out showin off at my buddies at his work. I was gettin some helium bottles for a show and blew an air line cause it got hot. So i used a fork lift. Usualy a sissor jack through the finder wells to get to the frame.this is a pic before the body drop just incase theres a ? lol

dont worry bout pickin it up.... just cut out the fenders so you can turn, you'll be golden then

never thought about that haha. but I can get jacks into any of the fender wells and if not pop the hood and unbolt the front bumper from behind and get to the horns that way.

if you can move it or have a friend just use a cherry picker(engine crane) you can attack it to the motor but i would just use some heavy steel to lay underneith you frame. just pull it up enough to get a jack underneith there.