looking for a "performance"regulator

257 views
12 replies
10 following
K
looking for a "performance"regulator
layedouton22z avatar
layedouton22z
+1y
I currently have a generic regulator with 1/4 ports...and it does not lift the ram very fast. I am looking to find a regulator that would allow a lot of nitro-flow to the bags airing it up faster. any help would be great. If anybody needs a basic regulator let me know as i wil have an extra. thanks
IMLOWER avatar
IMLOWER
+1y
do you have it going straight from the regulator to the valves or do you have a small charge tank between them if you dont add a tank and it will increase teh speed alot
layedouton22z avatar
layedouton22z
+1y
straight from the nitrogen tank to the valve manifold. no extra tanks
b2low avatar
b2low
+1y
the tank is a holding point for the nitrogen to build up...then you will get quick lift
mmautoworks avatar
mmautoworks
+1y
you need someplace to accumulate some volume your air can only flow as fast as the smallest point in your system, just a 3 gallon tank in between your bottlew and yor valves will make alot of diffrence
layedouton22z avatar
layedouton22z
+1y
i'm also looking at 200+ psi to raise the front...
mmautoworks avatar
mmautoworks
+1y
it takes that much pressure to get it up
layedouton22z avatar
layedouton22z
+1y
that much clears the tirers so i can turn...bodydrop with 22x on a 00 dodge ram like the pic...not exactly a lightweight truck
mmautoworks avatar
mmautoworks
+1y
dangggg but you still need a tank
time1 avatar
time1
+1y
Put a tank in there and you will be happy.