K
stock floor bodydrop on a 4 door dakota
Bag4DoorKota
+1y
has any one done one yeat? im about to do mine.looking for some info on the job
Wolf37
+1y
I am also looking for info on this. I will be doing mine around September, so when you do yours, post up lots of pics.
Bag4DoorKota
+1y
Originally posted by Wolf37
I am also looking for info on this. I will be doing mine around September, so when you do yours, post up lots of pics.
ok i will i,m in there to ill do a post there to man. how low r u looking to go?
I am also looking for info on this. I will be doing mine around September, so when you do yours, post up lots of pics.
ok i will i,m in there to ill do a post there to man. how low r u looking to go?
Wolf37
+1y
OK that's cool man, i am prob just going to go down enough to lay rocker. I am not sure yet on exactly on how low I want to go. I guess it all really depends on how much shit is going to get cut and raised.
Bag4DoorKota
+1y
do u mean pinch well on the rocker or the flat part of the rocker pass the pinch well.sound like u want to cut the floor? i,m going to cut my frame si i don,t have to lose my head room. the olney thing in the floor i going to have to cut is the traney hump.
KCTACO
+1y
Fresh Rydes in Spring Texas just finished one recently///i might know a little bit if you have questions.
Wolf37
+1y
Originally posted by Bag4DoorKota
do u mean pinch well on the rocker or the flat part of the rocker pass the pinch well.sound like u want to cut the floor? i,m going to cut my frame si i don't have to lose my head room. the olney thing in the floor i going to have to cut is the traney hump.
i mean pinch welds.....and if you are just going to do a new frame, that would be even better. my buddy was trying to get me to go that rout. I would love to see how that turn out. Are you going to do all the work in your shop? If you are, i might have to make a trip down there one day. Depending on how low you can get with only doing a new frame, i might that rout also.
do u mean pinch well on the rocker or the flat part of the rocker pass the pinch well.sound like u want to cut the floor? i,m going to cut my frame si i don't have to lose my head room. the olney thing in the floor i going to have to cut is the traney hump.
i mean pinch welds.....and if you are just going to do a new frame, that would be even better. my buddy was trying to get me to go that rout. I would love to see how that turn out. Are you going to do all the work in your shop? If you are, i might have to make a trip down there one day. Depending on how low you can get with only doing a new frame, i might that rout also.
974door
+1y
fresh rydes is a thing of the past. That dakota is for a buddy of mine, and it was a mofo to do.
Bag4DoorKota
+1y
Edited: 1/8/2007 4:08:44 PM by Bag4DoorKota
Originally posted by Wolf37
Originally posted by Bag4DoorKota
.do u mean pinch well on the rocker or the flat part of the rocker pass the pinch well.sound like u want to cut the floor? i,m going to cut my frame si i don't have to lose my head room. the olney thing in the floor i going to have to cut is the traney hump.
i mean pinch welds.....and if you are just going to do a new frame, that would be even better. my buddy was trying to get me to go that rout. I would love to see how that turn out. Are you going to do all the work in your shop? If you are, i might have to make a trip down there one day. Depending on how low you can get with only doing a new frame, i might that rout also.
im going to the flat part of the rocker. no new frame. i,m useing the stock fram and im going to add a pice of 2X3X1/4 wall tubeing in side for stranth.the cut the rest off to my hight i want frame to be
Originally posted by Wolf37
Originally posted by Bag4DoorKota
.do u mean pinch well on the rocker or the flat part of the rocker pass the pinch well.sound like u want to cut the floor? i,m going to cut my frame si i don't have to lose my head room. the olney thing in the floor i going to have to cut is the traney hump.
i mean pinch welds.....and if you are just going to do a new frame, that would be even better. my buddy was trying to get me to go that rout. I would love to see how that turn out. Are you going to do all the work in your shop? If you are, i might have to make a trip down there one day. Depending on how low you can get with only doing a new frame, i might that rout also.
im going to the flat part of the rocker. no new frame. i,m useing the stock fram and im going to add a pice of 2X3X1/4 wall tubeing in side for stranth.the cut the rest off to my hight i want frame to be
bdroppeddak
+1y
the first bodydropped dakota was a 4 door.....