FBI's FBSS lightning air system
706 views
37 replies
30 following
K
FBI's FBSS lightning air system
turbofire
+1y
Tell me what u find wrong with slams. I have mine on my truck for 8 months and drive it dailey. Not one problem and it has 2600 in the front end of a 03 s10. thicker wall built in bump stop. ASK SSD what bags to run.
Low_SST
+1y
^ you mean SD and what makes them all knowing gods of air ride?
91 drggn dime
+1y
Originally posted by Low_SST
^ you mean SD and what makes them all knowing gods of air ride?
He drives an s10, that would answer your question.
^ you mean SD and what makes them all knowing gods of air ride?
He drives an s10, that would answer your question.
chumpchange
+1y
good kit just installed it on a d-50 good products. only problem i had was the top part of the notch was not tall enough to lay the truck out on 20's so i added a patch on each side about an inch and a half tall and it worked perfect.
lowdyme
+1y
the only thing that i really didnt like about the kit is the compressor if its your first time on air you going to want a different compressor becaue i had to rebuild that damn flapper valve about 4 times but other then that the kit was good
turbofire
+1y
well at least i can afford a 2003 not a 91 that is in primer. I have a painted truck that is the shittttttttttt.
91 drggn dime
+1y
Originally posted by turbofire
well at least i can afford a 2003 not a 91 that is in primer. I have a painted truck that is the shittttttttttt.
do you want a cookie? my 91 is my project, my actual project, not some drove around noob mobile.
well at least i can afford a 2003 not a 91 that is in primer. I have a painted truck that is the shittttttttttt.
do you want a cookie? my 91 is my project, my actual project, not some drove around noob mobile.
turbofire
+1y
Edited: 12/3/2006 10:09:29 AM by turbofire
Ill take a cookie if u offer and what the hell is "noob" did you pass the first grade. And you better work on that project a little more it might be a antique before u get it done.
Ill take a cookie if u offer and what the hell is "noob" did you pass the first grade. And you better work on that project a little more it might be a antique before u get it done.
10switchbox
+1y
hey turbofire how bout you shut your mouth there buddy oh wait let me guess you got a truck now you think your a minitrucker go back to the ricers there spanky. and hmmmmm lets see he is in primer because his truck has a shitload more work into it than your and obviously isnt done with it so how about you and your cookie cutter barely modded truck go smoke a fat cock.
91 drggn dime
+1y
thank you Bill.
Those pictures in my profile are fairly old now. I dont ever update it b/c it takes Garrick a week or so to do it. I put my rendering up there and waited 4 days for it to be approved.
my truck is stockfloored bd, about to get mandrel bent backhalf rails, true cantilever rear setup, stroker smallblock and metal interior.
it is far from done.
Those pictures in my profile are fairly old now. I dont ever update it b/c it takes Garrick a week or so to do it. I put my rendering up there and waited 4 days for it to be approved.
my truck is stockfloored bd, about to get mandrel bent backhalf rails, true cantilever rear setup, stroker smallblock and metal interior.
it is far from done.