hardline or hose from EDC?

is it ok to run hardline from my EDC to my tank or should i stick with a high temp high pressure rubber hose?

Everyone i know uses hydraulic line from the EDC and then runs regular line from the end of that back. If you get a 4-5 foot piece of hydraulic line you should be good.

I just used a 4' leader hose off mine, they get really freaking hot though, so you better keep anything away from that line that could melt

hardline will break from torque of motor if it doesnt havea flex point.

stainless steel braided hose works well too.

I used a piece of copper hardline for my EDC, only around 10" of it, to my air dryer.

-Brad

the airlift kits come with a stainless braided hose, 2-3 ft i think, then connect to std plastic airline, and work fine...

you can buy the air lift ss braided hose for 25.