Mighty max sway bar help!

cut what out ?

I still have the sway bar and the radius Arms in the stock location. This page shows some of that work. http://www.bncoffroad.com/projects/mitsu/page_2.htm

Hope that helps some.

where did you get those tubs in the bed from ? And what did you do with the rad support ? lower the brackets insted of cutting the whole clip off like i did ?

just wondering if anyone read my post.... it does make sense!! i have pictures also.

The tubs are just trailer fenders. I have not really looked to see what was done. I am more of the type of letting the experts do it. The link has the best pics of my front end. What Curtis is saying looks like how mine was done if not then close. My mounts have been lowered.

Originally posted by royalblublood



Edited: 11/14/2006 7:17:42 AM by royalblublood

Edited: 11/14/2006 7:17:03 AM by royalblublood

Edited: 11/14/2006 7:14:43 AM by royalblublood

i cant do what brian did. i dont have the room he does. I have manual steering and the gearbox is rite there. And on the pass side the idler arm is rite there too. There is no room for that tube steek off the lower CA.



You could do the same thing, on the front of the arm.

i just sectioned the core support on mine instead of cuttin the frame horns. Hit me up if ya want some pics. I left the arms right where they were. I think im gonna make mine tubular this winter to get rid of em tho.

i just sent you an IM matt. thanks. i should just drive up there and look at your truck. your not far from us.

for lowering of the core support for the BD on my Max I just cut off the mounts and lowered them the proper amount instead of cutting the front of the frame off and z'ing it. works perfectly fine and doesnt mess with the strut bar or stabilizer.

i still did the Z in the frame. Z`ing the frame lets you lay the whole frame firewall back insted of just the front crossmember and the rear frame rails under the back of the cab. Its the second truck i did a Z on and it looks so much nicer!