Flaming River Columns?

Edited: 11/2/2006 7:21:20 PM by iLLairgasm

Anyone ever put one in a mazda or import truck?

What size?

any specific model?

What did you do about the wiring? im guessing you have to adapt it to the factory wiring?

How about adapting it to the steering box?

Any help or advice would be great.

Edited: 11/2/2006 7:59:48 PM by bagged85

easy. they make them custom length, but measure your stock one to see if they have one that will work.usually they havea chart of were to measure from for proper lenght. they use the same wiring colors for GMs, all harness kits come w/ gm connectors, as u can get the connectors and pin in your own wiring in the truck. steering box would be cake, just need some universals. 1 to fit the column and 1 to fit the gear. if u cant find one for the gear, u can always take the stock rag joint off the box, grive the rivets out and get rid of the rubber. take that piece that sets on teh box w/ the jam bolt and weld it to a universal. thats what i always do.also look into IDIDIT colums, i beleve there the same ones.

hmm good ot know... i'll check their site

i'm actually goin to order mine tommorow

Order me one too Ty ahahahahahahahhaa