does anyone make a 20x7.5 billet yet?
562 views
16 replies
10 following
K
does anyone make a 20x7.5 billet yet?
bdroppeddak
+1y
rudy did i hear you say you got new wheels?
Dirk
+1y
Classic Wheel Works
204 S Irwindale Ave
Azusa, CA 91702
(626) 815-1577
Somebody's getting shafted, the billet hoop is metal spun, not a forging, or casting.
Take a flat peice of aluminum, weld it into a band, and spin it into shape, thats the hoop, we use metal spinning for tons of stuff in aerospace. $1200 is too much in imho. The band would be 1/2" smaller and the metal spinner wouldn't have to change much. The wheel business is crooked in more ways than I can count, you just have to find people you can trust.
204 S Irwindale Ave
Azusa, CA 91702
(626) 815-1577
Somebody's getting shafted, the billet hoop is metal spun, not a forging, or casting.
Take a flat peice of aluminum, weld it into a band, and spin it into shape, thats the hoop, we use metal spinning for tons of stuff in aerospace. $1200 is too much in imho. The band would be 1/2" smaller and the metal spinner wouldn't have to change much. The wheel business is crooked in more ways than I can count, you just have to find people you can trust.
tofnlows10
+1y
most places get there wheel hoops from some where...like u.s. wheel....anyone one of them can cut into the hoop and do it...but not w/o a higher price...
maddawg
+1y
Originally posted by bdroppeddak
rudy did i hear you say you got new wheels?yes,they are these.
rudy did i hear you say you got new wheels?yes,they are these.
maddawg
+1y
Originally posted by goinglow
http://www.billetwheel.com/ - Boyd Coddingtonhttp://www.coloradocustom.com/ - Colorado Customhttp://www.introwheels.com/ - Intro Wheelshttp://www.uswheel.com/bonspeed/ - Bonspeed Wheelshttp://www.billetaccessoriesdirect.com/ - Billet Accessories Direct (B.A.D)http://www.deviouscustoms.com/ - Devious Wheelshttp://www.budnik.com/ Budnik Wheelshttp://www.centerlinewheels.com Center Line
www.wheelvintiques.com www.brentzwheels.com
I think that list covers most of ur custom cut wheels...
uh...i don't think centerline will do it, i've spoken to them personally about doing it.
if you look at my 18x13 in my profile (it's the pic of the rear end with the truck on the lift)those are centerlines.i had to take those somwhere else to modify them .
centerline will not do it because of liability issue's.those rears costed me $2,200 to have done....and then i decided to go 20's.
i love that guys saying....i have a problem with indecision...but i'm not sure.lol
http://www.billetwheel.com/ - Boyd Coddingtonhttp://www.coloradocustom.com/ - Colorado Customhttp://www.introwheels.com/ - Intro Wheelshttp://www.uswheel.com/bonspeed/ - Bonspeed Wheelshttp://www.billetaccessoriesdirect.com/ - Billet Accessories Direct (B.A.D)http://www.deviouscustoms.com/ - Devious Wheelshttp://www.budnik.com/ Budnik Wheelshttp://www.centerlinewheels.com Center Line
www.wheelvintiques.com www.brentzwheels.com
I think that list covers most of ur custom cut wheels...
uh...i don't think centerline will do it, i've spoken to them personally about doing it.
if you look at my 18x13 in my profile (it's the pic of the rear end with the truck on the lift)those are centerlines.i had to take those somwhere else to modify them .
centerline will not do it because of liability issue's.those rears costed me $2,200 to have done....and then i decided to go 20's.
i love that guys saying....i have a problem with indecision...but i'm not sure.lol
maddawg
+1y
Originally posted by Dirk
Classic Wheel Works 204 S Irwindale AveAzusa, CA 91702
(626) 815-1577
Somebody's getting shafted, the billet hoop is metal spun, not a forging, or casting. Take a flat peice of aluminum, weld it into a band, and spin it into shape, thats the hoop, we use metal spinning for tons of stuff in aerospace. $1200 is too much in imho. The band would be 1/2" smaller and the metal spinner wouldn't have to change much. The wheel business is crooked in more ways than I can count, you just have to find people you can trust.
good people over there.i've dealt with them before.
the wheel buisness is a buisness, there objective is to make money.
although i paid a whole lot of fricken money to have work done to my truck, i don't feel that I got shafted because everything is exactly to MY specs.
only bummer is i've spent so much fricken money on it that i don't have another 20,000 to finish the damn thing.it's still fun to drive as is though....
Classic Wheel Works 204 S Irwindale AveAzusa, CA 91702
(626) 815-1577
Somebody's getting shafted, the billet hoop is metal spun, not a forging, or casting. Take a flat peice of aluminum, weld it into a band, and spin it into shape, thats the hoop, we use metal spinning for tons of stuff in aerospace. $1200 is too much in imho. The band would be 1/2" smaller and the metal spinner wouldn't have to change much. The wheel business is crooked in more ways than I can count, you just have to find people you can trust.
good people over there.i've dealt with them before.
the wheel buisness is a buisness, there objective is to make money.
although i paid a whole lot of fricken money to have work done to my truck, i don't feel that I got shafted because everything is exactly to MY specs.
only bummer is i've spent so much fricken money on it that i don't have another 20,000 to finish the damn thing.it's still fun to drive as is though....
maddawg
+1y
Originally posted by yumuggn
Yes they do make a 20x7.5 in billet they also have it in forged one piece chrome I can get either of these if your interested. L8R
there's your answer...woot
Yes they do make a 20x7.5 in billet they also have it in forged one piece chrome I can get either of these if your interested. L8R
there's your answer...woot