ranger suspension

Hey guys, I need some schooling in late model ranger front suspension. I know its control arms after 98, but then the Edge has torsions (in 02?) but did the normal rangers change? What about 06/07? Thanks, Im a chevy guy mainly

normal rangers are still the same coil control arm suspension from 98 to present, all edges are torsion bar

97 - BELOW --- I BEAMS
98 - PRESENT --- CONTROL ARMS
EXCEPT THE EDGE WHICH AS LISTED ARE TORSION BARS

dave just find a gun and a bullet. much easier than working on a ranger..well an I beamer at least.

ranger suspensions suck, they cost so much to do right

I love the negative camber you can get out of a ranger!!!!

rangers are badass dude...i beams or not i love em

Rangers are not that bad guys. The susepsions are as mentioned above. Everything 98+ is control arms except the edge which is torsion bars for a 4x4 set up.

i just started my ranger project/daily driver and yes the front setup sux ass.mine don't lay in front cause i have no lowered control arms and it looks retarded.

Originally posted by SolarX



i just started my ranger project/daily driver and yes the front setup sux ass.mine don't lay in front cause i have no lowered control arms and it looks retarded.

Once you get the lowers don't forget to notch the rear mount so the arm can articulate all the way up. And notch for those tie rods