rocker switches for baggies
567 views
18 replies
12 following
K
rocker switches for baggies
chevygurly
+1y
we carry them,there is a red LED in them too....i dont have my catalog here at home,i;ll shoot you a message on Monday...i wanna say we have them pretty cheap.
dssur
+1y
go to a junkyard and find a set of power window or power door lock switches that are sexy to you. Not only will you have the switches, you'll also have the preciecely trimmed mounting bezel that is a crapload easy to make look nice blended into a center console than ANY aftermarket rocker is going to look.
Low_SST
+1y
Originally posted by Russ-D
go to a junkyard and find a set of power window or power door lock switches that are sexy to you. Not only will you have the switches, you'll also have the preciecely trimmed mounting bezel that is a crapload easy to make look nice blended into a center console than ANY aftermarket rocker is going to look.
i need to hit one up anyways so ill see what i can come up with
Originally posted by ChevyGurly
we carry them,there is a red LED in them too....i dont have my catalog here at home,i;ll shoot you a message on Monday...i wanna say we have them pretty cheap.
if you had something like your mini rockers with 6 pins that would be ideal.
go to a junkyard and find a set of power window or power door lock switches that are sexy to you. Not only will you have the switches, you'll also have the preciecely trimmed mounting bezel that is a crapload easy to make look nice blended into a center console than ANY aftermarket rocker is going to look.
i need to hit one up anyways so ill see what i can come up with
Originally posted by ChevyGurly
we carry them,there is a red LED in them too....i dont have my catalog here at home,i;ll shoot you a message on Monday...i wanna say we have them pretty cheap.
if you had something like your mini rockers with 6 pins that would be ideal.
Low_SST
+1y
i had an idea as to how i want to mount them and i was going to get a piece of 1/8" stainless or aluminum and then get it cnc plasma cut so i can pop the switches in and then i was going to make a mount for them that would be raised up off of the console and then the piece of metal would be frenched in.
fatheadjames
+1y
Use the 2 prongs and put diodes on the wires.
whynotfab
+1y
Originally posted by fatheadjames
Use the 2 prongs and put diodes on the wires.
was just about to suggest that, im making a box with 3 of the mini-rockers. 1 for front, 1 for back, 1 for all (i only have f.b. 4 valve setup) so for "all" ill use diodes. those switches kick ass though.. mount in almost anything lol.
Use the 2 prongs and put diodes on the wires.
was just about to suggest that, im making a box with 3 of the mini-rockers. 1 for front, 1 for back, 1 for all (i only have f.b. 4 valve setup) so for "all" ill use diodes. those switches kick ass though.. mount in almost anything lol.
Low_SST
+1y
i was looking to run 6 switches mabey ill just run 4 mini rockers and 2 of the bigger ones for front and back
Low_SST
+1y
i actually think im gonna get the minirockers but i need to draw out the wiring so i can get a visual picture of how its wired.
tisz1
+1y
This is what i had used - Its 8.99 but worth it cause of the long bat handle
http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=ECH&PartNumber=TG7010&Description=Switch+-+Toggle
http://www.napaonline.com/MasterPages/NOLMaster.aspx?PageId=470&LineCode=ECH&PartNumber=TG7010&Description=Switch+-+Toggle