W
flippin ball joints?
R
rwloper
+1y
my truck is bagged with stock everything and I have about 3/4" until it hits the front crossmember. will flipping my ball joints get me on the ground? also, do i have to flip the upper and lowers or just the uppers?
D
dwnlowx
+1y
it could get you lower. you wanna flip the lowers and you have to re tapper the holes on some spindles ,and a alignment
R
rwloper
+1y
i'm running stock spindles. so i have to flip uppers and lowers?
maddawg
+1y
Originally posted by dwnlowx
it could get you lower. you wanna flip the lowers and you have to re tapper the holes on some spindles ,and a alignment
dude...what are you talkin' about???
your supposed to re-mount the ball joints to the top sides of the control arms...you don't literally flip the ball joint upside down.
it could get you lower. you wanna flip the lowers and you have to re tapper the holes on some spindles ,and a alignment
dude...what are you talkin' about???
your supposed to re-mount the ball joints to the top sides of the control arms...you don't literally flip the ball joint upside down.