IN NEED OF HELP!!!!

Edited: 4/27/2006 6:07:10 AM by cheech136

i have a 99 mazda b2500 which is basically a ranger, i want a rim that is 18x8.5 with a 25 offset but i need a one inch wheel adapter does any one know with this set up can i tuck these rims under my fenders? plz respond

Hey cheech, its chong! I have 20x8.5 on my 99 mazda b3000 with a 38 mm offset any they work just fine, hope this helps.

i am running 20x8.5 with 6" backspacing.

Originally posted by Gump1986



i am running 20x8.5 with 6" backspacing.

me too

Originally posted by clenzer72



Originally posted by Gump1986



i am running 20x8.5 with 6" backspacing.

me too



yeah and how do i measure my back spacing?

it it has a +25 offset and then a one inch wheel adapter? probably will in from but not in back. basically with the adapter it will make that wheel a 0 offset and at 8.5" wide it probably will not tuck. they would probably be flush with the wheel wells. i run 8.5" wide 18's and 20's and they tuck by about a half an inch. i don't think yours will man.

Originally posted by ddranged



it it has a +25 offset and then a one inch wheel adapter? probably will in from but not in back. basically with the adapter it will make that wheel a 0 offset and at 8.5" wide it probably will not tuck. they would probably be flush with the wheel wells. i run 8.5" wide 18's and 20's and they tuck by about a half an inch. i don't think yours will man.

well what if i have the sx model and my fenders r flared out a little more and if i get my fenders rolled?

you have fender flares? there isnt a diff in ranger fenders if it has a flare or not(b sereies same way). y are you having to run adapters?

i got some 19" fwd wheels on my ranger ill sell ya if ur interested... I have a stepside send me an IM or e-mail