K
custom yota uppers
shaved dime
+1y
Edited: 4/25/2006 4:46:36 PM by Shaved Dime
first off..this is my first attempt at makin new control arms..so go easy...the pics are where they are almost finished, i added some more brakets for strength and whatnot
well i broke my oem uppers mount so i decided i needed some beefy ass uppers and also so i can get full lift..so i used a combo of 1/2 plate steel, 1 1/4 dom tubing with 1/4 walls, 3/4 heims, and about 60$ in grade 8 bolts... they are a lil longer than stock, which helps with lift, so i can clear the 2600s. im tired..there may be more and i forgot..post up qs or comments
first off..this is my first attempt at makin new control arms..so go easy...the pics are where they are almost finished, i added some more brakets for strength and whatnot
well i broke my oem uppers mount so i decided i needed some beefy ass uppers and also so i can get full lift..so i used a combo of 1/2 plate steel, 1 1/4 dom tubing with 1/4 walls, 3/4 heims, and about 60$ in grade 8 bolts... they are a lil longer than stock, which helps with lift, so i can clear the 2600s. im tired..there may be more and i forgot..post up qs or comments