s-10 on 22's!

305 views
10 replies
8 following
K
s-10 on 22's!
drggnsdime02 avatar
drggnsdime02
+1y
is it possible for an 02 s-10 to lay hard on 22's with the sd.com 3 link setup????? will the stock spring perches that the lower bars from the kit use keep the truck from layin out all the way?? if so, how should i go about it then? oh yeah, i plan on bodydroppin in the near future as well...
BodyDragginGMC avatar
BodyDragginGMC
+1y
You talking 22s in all corners or just the rear?
555 avatar
555
+1y
Hes talking about the rear. I think thats y he asked about the 3-link.
travis98s10 avatar
travis98s10
+1y
yea itll lay. I had the 3 link on 20's and had plenty room. youll need to notch the tops of the leaf spring perches b/c the bar will hit and make sure your bridge is high enough so the bags over the axle dont bottom out and the wishbone clears. Youre going to need at least a 35 or 30 series tire though
olskoolpup avatar
olskoolpup
+1y
Edited: 4/4/2006 8:13:02 AM by 86IsuzuPup

if you want to "lay hard", you shouldnt use the stock leaf hangers. sd.com makes an "under frame" mount that you should use. mount it where the frame kicks up. this will also keep you from dragging through the bushing.

check out sd.com's display frame on their website and youll see exactl what i mean.
olskoolpup avatar
olskoolpup
+1y
Use theseor these

and mount them like this

drggnsdime02 avatar
drggnsdime02
+1y
i think i'm just gonna go with the sd.com 5 link setup. that way i know i can lay and i know i will have minimal axle roll. (i hear the 3 link setup link bars are so short you get mad axle roll.) because i def wanna be able to cruise properly at all heights.. thanks for the advice..
drggnsdime02 avatar
drggnsdime02
+1y
i think i'm just gonna go with the sd.com 5 link setup. that way i know i can lay and i know i will have minimal axle roll. (i hear the 3 link setup link bars are so short you get mad axle roll.) because i def wanna be able to cruise properly at all heights.. thanks for the advice..
555 avatar
555
+1y
Better ask About the 5-link laying 22s. I asked when it first came out and Jason said it wouldn't work. But with all the small ass tires outnow I'm sure it can be modded to work or something. Good luck with it.
Deflaytedwayz1 avatar
Deflaytedwayz1
+1y
what about in the front? i've been told the Cool Ride arms from air ride technologies will work but does anyone know for sure or any other info on where i can get a hold of some.