window tint won't stick..

yeah all the water needs to be out. if there is water in there I'm sure the adhesive will not bond to the window, causing the delamination.
Chris

thanks thats gotta be the problem

plus too much soap in the water will keep it from stcking.
Ben

Kake sure you dont have too much soap in your solution. You only need an average of 1 teaspoon per liter of water. Make sure the glass is very clean. Also I have found when tinting rear windows on trucks if you pull the window out you will get better results. With windows that have a tight rubber seal its hard not to get rid of the contamination and it gets under the tint. Also I have never had tint just fall off of the glass. Make sure that the protective layer is removed when applying the film to the glass to exspose the glue. Make sure you get as much as the moister out from under the film for faster adhesion. It will be hazy and splotchy for a feew days. If you need anything else hit me up.

^*MAKE