BYC for clientele and workers ONLY!

Mike, it's sunday night. When is the weekend considered over? You said you'd be answering all old emails this weekend and my inbox is empty... My most recent email to you was on Jan 25, 2006. I've sent a few other prior to that without a response. I can't come up with any reasons as to why I should send another as you said you would be answering all old emails.

Here's the last I heard from ya, on Dec 4, 2005...

From: BuiltByBYC@aol.com Add to Address Book Add Mobile Alert Date: Sun, 4 Dec 2005 16:41:56 EST Subject: Re: chevy colorado control arms To: bigbarrett@yahoo.com uppers done, working on the lowers. Im thinking of switching to a different lower balljoint with more travel. I ordered several that should be very close in dimensions. as soon as I go thru those and see if any would fit the Colorado suspension, ill finish the lowers. thanks Michael WhiteBarnyard Customs125 Gumbo dr. Rockwall Texas 75032972-722-5435

I know you finsihed up work on laying out a colorado the week after new years so obviously you've had the time to go through the balljoints and see what works with the suspension. Are the lowers done? Let me know. Because if they are, I have your paypal address and I'll be sending you 50.00 US dollars so you can afford to ship them out. That should be more than enough money. I'll even send you a box if ya need it. Just let me know.

Originally posted by xinsertnamex



no i wasnt under a rock i purchased my s10 arms through him and got them quick and they lay hard as fuck



I hope your control arms dont hit the ground.

As per mikes site on Saturday 2/25/06




"I finished a set of special order S-10 arms and I cut some tubes for parts ill be working on next week. I also made some bushing ended watts link bars. I have 8 in stock now and try to keep at least 4 in stock at all times.

I cut some tubing for Ranger crossmembers. I have one old order for one of those to fill and ill make an extra one. Im gonna do these today and tomorrow so they dont interfere with regular work times or production time of any other sets. I finally got out the S-10 jigs and am starting to make some more of these finally. Friday I cut some upper balljoint plates for S-10 and cut the main holes and drilled the bolt holes. I also cut some tubing for S-10 uppers Friday and plan on cutting tubing for S-10 lowers on Monday. I will finish the Mitsu arms ive been trying to get too for weeks also. I then plan on doing S-10, Mazda, Nissan and GM fullsize.



NEXT WEEK:

Im finally getting on the S-10 and GM fullsize. hopefully I get several made as the S-10 and GM fullsize are what we are most behind on. I plan on doing some Nissan and something else at the same time as the GM stuff, probably find something I have an old order for. maybe something I have only one or two orders for, then get them out quickly. The newest parts pages are: Ranger pages in the shop projects. I made a page for the red Ranger and a page for the black Ranger we did a frame Z on.

the black Ranger we just did the Z and built tube arms for. the red Ranger we did the bag setup on."

Originally posted by clean cut creations



As per mikes site on Saturday 2/25/06



"I finished a set of special order S-10 arms

OMG could those be my arms!?!?! mine were a special order...we'll see...

i just have a question for mike, i read some of the stuff that is on the 40 pages before this, i need some lower control arms for my 93 s-10, but i need them before showfest like in april sometime, maybe sooner, will i get them before then and how much?

Originally posted by LaYeDOuT93



i just have a question for mike, i read some of the stuff that is on the 40 pages before this, i need some lower control arms for my 93 s-10, but i need them before showfest like in april sometime, maybe sooner, will i get them before then and how much?

IF you decide to place an order, order COD only and don't expect to get them in anytime soon. good luck

PS. my inbox is still empty mike.

WELL MIKE MY EMAIL BOX STILL DOES NOT HAVE ANY EMAILS FROM YOU. YOU SAID TO EMAIL YOU AND THATS THE ONLY WAY YOU WILL GIVE PEOPLE UPDATES BUT I SEE THATS NOT WORKING EITHER. I'VE TRIED CONTACTING YOU THROUGH IM'S ON HERE ALSO BUT YOU IGNORE THEM AND YOUR PHONE IS DISCONNECTED. HOPEFULLY YOUR WEBSITE IS CORRECT THAT YOU'LL BE MAKE GM FULLSIZE ARMS THIS WEEK. BUT I HAVE BEEN TOLD THAT MANY TIMES. HOPE YOU FIGURE THIS OUT SOON. BEEN WAITING 8 MONTHS NOW.

Originally posted by LaYeDOuT93



i just have a question for mike, i read some of the stuff that is on the 40 pages before this, i need some lower control arms for my 93 s-10, but i need them before showfest like in april sometime, maybe sooner, will i get them before then and how much?

How are people still ordereing his product???? HHHHEEEEELLLLLLOOOOOOO!!!!!!!!

After reading 40 pages of this shit you still want his arms. KUSTOMWERKS will make you a set you can count on.

You are almost as big of an idiot at Mike.

Sorry to say it.......