K
heres my next mod
Severed701
+1y
no prob..oh and for the tubing..i pickup up some 1.5inch exhast tubing ..it has a galvanized type coated...so you need to really grind and clean where u weld...but this helps to protect the inside of it from corrosion
Severed701
+1y
didnt mean to hijack the thread either..another way to drain the water would be to use some vinyl tubing and a fittin comin out the bottom..might be easier than a brake line i duno..mine just drain out the bottom of the bed
impounded dakota
+1y
route an airline in there and one valve and use it to shoot stuff, lol
DawgsledMazda
+1y
another tip on this...
put a brace from the bottom of the tube over to the fender. the tube is welded into thin sheet metal and the whipping of the antenna will crack the filler eventually if you dont brace it. it will especially do this if its a power antenna.
put a brace from the bottom of the tube over to the fender. the tube is welded into thin sheet metal and the whipping of the antenna will crack the filler eventually if you dont brace it. it will especially do this if its a power antenna.