Laying out an '04 Civic

I've checked the forums and found pics of the newer civics laying low.Now I'm tempted to lay out my '04 civic sedan.It's my daily driver but boring as it gets.What is actually needed to lay low without slicing up the body?Do you need cans,juice,or can you use bags?Any tips,advice,and pics of setups front and rear would be nice.Just want to know what I'm getting myself into.Thanks for any help in advance.

hey man whats up! your thinking what im thinking. i havnt seen 03 or 04 civic laid out!.i drive my civic as daily driver. i know the suspenions are differnt from the last generation. the new civics has the mcpherasions struts. my 95 monte carlo had mcpher. struts till i juice it and now it lays hell out.. but if you do your civic ill give you mad props for it! check my profile on it.. hope to see your ride.. and hope maybe some out there can help, good luck on your ride.

Ya it's been on my mind for awhile.My truck is in storage and nowhere to finish it for now.So I want a nice daily but not over the top.(for now,lol.)Anybody else out there have any comments or help?Thanks!!!

i have an 03 that drags pinch molding.

i've had bags, now i'm in the process of switching to juice. do it right and juice it the first time.

my front struts are modified, and my rear end is tubbed. aswell as the subframe being notched. theres a picture of it with a stock wheel and tire in my profile, (which was before i notched the subframe) it tucked 6" including tire. now that it's notched and juiced it's now on 18"s and is an inch from a lug nut.

Check out ooakk.com they have one laid out pretty nice.

Ya james I seen your car it was the first I looked at.And the one on ooak.com is badass.I'm not a huge fan of juice.I have a set of bags kickin' I was wondering if I can use them.I had a buddy that had juice on his civic hatch and the car isn't very straight anymore.Is there away to avoid that?It's a daily right now,so I don't want to cut it up just yet.Just want it to sit low,yet able to get over speedbumps,crapy roads,and driveways easy.

if you decide juice.. pics of my front struts are in my profile, that'll get you an inch over the wheel on 18"s without cutting.

if you end up doing air.

use - www.universalair.com - strut bags for the front, and basic 2500lb bags in the rear, if you can, use conitech's cause they are small, that's what i had. build a bracket of the rear control arm, and a cup for the strut tower in the rear, easy shit, if you want i'll sell you my old cups cheap. haha. message me and let me know.