fuel cell

6065 views
27 replies
10 following
K
fuel cell
stylinranger avatar
stylinranger
+1y
do they make a fitting that u could put in a fuel cell to conecot the charcol canster
96rangerxlt avatar
96rangerxlt
+1y
There are two fittings on the top of my fuel cell. One is connected to the return and the other is the emissions system. I used a normal AN-8 fitting with some hose and extended it to meet the stock line.
4.0ranger avatar
4.0ranger
+1y
if it has a FTP sensor, then it is regulated by the PCM, if it isnt hooked up then it will throw a code. my truck runs fine, no skipping or not bad gas milage, but it still wont pass. even if there is no CEL on, the truck wont pass b/c the computer isnt "ready" or all the tests are not complete.
96rangerxlt avatar
96rangerxlt
+1y
right i understand that, but you said your friend w/ a 96 and no FTP has passed right?
bodydropped85 avatar
bodydropped85
+1y
96 is an older program on OBD II so its more forgiving than newer stuff.
loweredtillidie avatar
loweredtillidie
+1y
i'm goin to put a 289 in my ranger and basically everythings gonna be changed from what it came with so will a fuel cell with a fuel pump from like MSD thats external work alright?
96rangerxlt avatar
96rangerxlt
+1y
yeah it should. just make sure you get one for a carb motor, not an EFI motor. they use two different model # pumps.
baha avatar
baha
+1y
yea carb motors require less fuel pressure