Help bagging 79 c &c dually

Bagged the front of it and not close to laying what needs to be done been reading and so far came up with changing control arms and spindles and do I have to do both or can I do one or the other and the back will be 4 linked definitely not like bagging a s10

spindles for sure. what size tires are you running? Triangulated 4 link should get the job done for ya out back.

Not sure yet but seen a tire size on here but have to find it any suggestions

most recommended are like 225/75 or 215/60's. I posted a thread about it a few weeks back.

sup guys, i also have a 79 cc im worki on. i have so far bags on the front and rear it is simply bagged in the back with a 6" c-notch from western chassis. it was a hacked job from a local shop....

but innie who, i plan to 4 link the rear wit a forum member on here as well. the fronts simple, just replaced the springs with bags.

i plan to get 3" drop spindles up front.

right now its a 2 switch set up, 4 valves and 1-3 Gal tank with 2 compressors. we are gonna add another switch for the front and add 4 more valves. i just pulled the bed so i could assess the damage done by the local rip off shop.

here is my thread hope this helps