wiring help needed

it may not be possible i dunno so here goes. I have a brand new 10 switch box but im only going to be running 4 valves  is there a way to wire this up to a 10 switch box?
 
 
 1.green -driver front up
2.yellow/white -driver front down
3.brown-passenger front up
4.yellow- passenger front down
5.green/white-driver rear up1.green -driver front up
2.yellow/white -driver front down
3.brown-passenger front up
4.yellow- passenger front down
5.green/white-driver rear up
6.blue-driver rear down
7.white -passenger rear up
8.black-passenger rear down
6.blue-driver rear down
7.white -passenger rear up
8.black-passenger rear down
 

Black_________________ Front Left Pressure Brown _________________ Front Right Pressure Purple_________________ Rear Left Pressure Blue_________________ Rear Right Pressure Orange_________________ Front Left Exhaust Yellow_________________ Front Right Exhaust Green_________________ Rear Left Exhaust White_________________ Rear Right Exhaust Red _________________        12 Volt Power Supply

jeremy, you need a new avatar and sig. lol

my colors are a tad diff but no biggie.   .red- power   2.green-driver front up   3.yellow/white-driver front down   4.brown-passenger front up   5.yellow-passenger front down   6.green/white-driver rear up   7.blue-driver rear down   8.white-passenger rear up   9.black -passenger rear down   would i just splice these together or what ? or will it mess my box up?     2 and 4  for front up 3 and 5  for front down              rear 6 and 8 for rear up 7 and 9 for rear down