K
94 Jeep Cherokee
LowriderLee
+1y
My friend has a jeep cherokee that he wants to lower a little... Does anyone know where i can get a flip kit that will work with this vehicle? I went to a few sights that were "shop by car" and came up with nothing. So if anyone knows one made for this truck or one made for a different truck that i can use, please let me know. Thanks.
LowriderLee
+1y
Anyone?
huskerdually
+1y
I thought the axles were already above the springs on those. Could be wrong. And if they are blocks are not safe on the front.
LowriderLee
+1y
The axle is definitely under the leafs...
bodydropped85
+1y
ranger front springs(93-97 will work i know) and blocks in the rear.
bunkered13
+1y
Edited: 3/3/2007 1:34:02 PM by bunkered13
i helped a guy do one. the guy before him cut the springs and it rode like ass. it was bottoming out on the bump stops so we cut bumpstops off about 2 1/2 - 3 inches up. got bumpstops from autozone and welded the nut on the inside, welded the washer to the pipe where the old bump stop was, and just screwed the new bump stops in. i hope that helps. http://www.acceleratedautosport.com/page13dec2006.jpg here is a pic of it.
i helped a guy do one. the guy before him cut the springs and it rode like ass. it was bottoming out on the bump stops so we cut bumpstops off about 2 1/2 - 3 inches up. got bumpstops from autozone and welded the nut on the inside, welded the washer to the pipe where the old bump stop was, and just screwed the new bump stops in. i hope that helps. http://www.acceleratedautosport.com/page13dec2006.jpg here is a pic of it.