K
BRAKE MASTER CYLINDER!
Irocka92hardbody
+1y
anyone have one or know how to rebuild it? for a 92 nissan pickup, must be from 91-95
WeightLimit
+1y
Edited: 12/9/2006 6:31:03 PM by WeightLimit
Auto Zone sells the rebuild kit and the replacement part. Never done a rebuild on one though.
http://www.autozone.com/servlet/UiBroker?UseCase=C002&UserAction=performAutomotiveSearch&Parameters=%7C%7EREGULAR+PARTS+LOOK+UP%7C%7EBrakes+%26+Traction+Control
Auto Zone sells the rebuild kit and the replacement part. Never done a rebuild on one though.
http://www.autozone.com/servlet/UiBroker?UseCase=C002&UserAction=performAutomotiveSearch&Parameters=%7C%7EREGULAR+PARTS+LOOK+UP%7C%7EBrakes+%26+Traction+Control
balcar
+1y
you can just put in the new rubber parts most of the time. i used to restore old cars and there would allways be lots of rust in the master cylinders and I would have to use a tool to clean the cylinder walls. Bit yours isn't that old so you probally won't have to. Just feel the inside of the cylinder to make sure its all clean and free of any corrosion.