notch help

ok i recently layed mine out on 20s, or almost. in the back i have a kp 6link and the notch is welded in to far forward. the axle is centered but the axle pads hit the back of my notch what would be the best way to fix this. the front lays but the back is about 1/2 an in from laying and it really pisses me off any help would be appreaciated

cut the axle pads off.

That sucks man. If it were me, I would be slapping myself over some shit like that. I have nightmares about fucking up the rearend of my truck laying it out. Me and a Sawzall on the rearend are not a good sight.



-JONWR

Originally posted by bdroppeddak



cut the axle pads off.

X2

backhalf it x100

I always cut twice, measure once

-JONWR

lol i knew back the back half thing was gonna come up lol i dont have the knowledge to do that. i cant cut the axle pad off because the bushings stick out farther than the pads do so i guess my axle pad and my bushings are hitting. i thought about cutting about 2inches out backwards and about 3inches up out of the notch but i am scared that will weaked it too much

james work slogan - 2 sips, cut 3 or 4 times!

oh i didnt do the notch i paid someone else to do it