K
Escalade wheels fit??
Trippyswitches
+1y
DO escalade and Chevy z-71 wheels bolt right up to HBs?
3day
+1y
yes
Trippyswitches
+1y
Thats cool a wheel salesman told me they to be bored or some s**t
mitsu94
+1y
dont know about hbs but on my max the center has 2 b bored out b cause the hole is 2 small 2 let it set flush against the hub
Twisted Galant
+1y
The wheels need to be milled out to fit over the hubs. I have been getn them milled for $50.00 for all 4 wheels.
ptman2002
+1y
hey tripp. i have them on my HB and they dont bolt up. what i did was used 1/4 inch spacers on the back and grind down the tabs on the front and they will work. also make sure you get bulge seat lug nuts. any ?s you can email me at tad99@aol.com
97HB
+1y
they need to be bored out about 3/4" i just got some and thats what had to be done....
Twisted Galant
+1y
3/4" damn u wont have none of the center left dude Might want to rethink that.
97HB
+1y
HEY 3/4" IS ALOT! WTF was i thinkin' measure twice bore once, how about that...
olskoolpup
+1y
hes right thay have to bored out from 3.25" to 4". its not that hard really. check out www.nissanminis.com and look at the mod section. i bored out my eskies with the router method and it worked great. rolls smooth as ass. and it sure beats taking them to a machine shop and spending like $150 to have them milled.