Lowest mini???

Whats the lowest mini truck or full size you have seen with out adjustible suspension, Any pics?

I used to have an 94 toyota excab that almost layed frame with out bags had to cut the wheel wells out in the front on 18s so i could drive it it was hammered. But that was back in the day lol.

Edited: 7/13/2007 8:03:48 AM by ///RELAXED 720

my nissan from the early 90s



shitty pic, but the frame was 3 fingers from the ground



my 95 tacoma on 18s

My old s10 before i put air ride on it, had like a 8/10 drop on it, bout an inch off the ground, was damn near tuckin 17's on 40 series tires

Look at the mazda in my profile I dont know how to post pics tuckin a 205 40 16

Mines pretty low, I measured 2-3/8" under the motor crossmember and I drive it like 5k miles every summer

My dad's Rat Deville is actually Fn low (not exactly 3 inches at the lowest part of the frame) and we drove it for a 1300 miles trip 2 months ago without any problem.



More pics of the Rat Deville on our myspace pics:

myspace.com/kustomcreationzdotnet

no pix of it but my 720 was pretty low for a day or 2 ......i had pulled the torsion bars(like everyone did back in 94 ) rollin on some 14" hammers & then when i had the money bought a set of 2" drop spindles & thought "we dont need to put the bars back in do we?" well i didnt & the front would drag the ground everytime i let off the gas......

I was driving my nissan once with 4 of us in it. if I drove in the middle of 2 lanes it would drag the road. I eventually got the tranny crossmember stuck in a railroad track later that night. I kept giving it gas until we got unstuck. it ripped a bolt right out of the tranny cross member. I should of had everyone get out, then try to move, but we were all drinking a bit too much that night. this was also right after a real bad wreck with a train and several cars that were stuck on the tracks. A cop showed up trying to help and I had to have the truck towed home.

@ kevin's kidney buster

Edited: 7/13/2007 8:52:21 AM by layedoutb2k

Its a shitty pic cause it was off my phone, but it was right around 3" off the rocker. Bodydropped bitches. Fender rubbed whenever I turned.It was a beast too. 18 psi with only monoleafs in the back. I shouldve bought stock in u-joint manufacturers.