1994 gmc need help, cant get it to lay on 22s

scrapin make sure you have drop spindles.you already said you notched the frame for the tie rods,you can run the stock control arms but because they are big and kinda square they will bind on the frame you can notch the frame there or run tubular arms also see if your rim will hit the fender lip or part of the inner fender structure .i had to cut some of my inner fender structure to allow the wheel to get it to lay out and you will have to make some type of inner fender or brackets to hold any abs or any other pcs that are mounted to the factory wheel well you might have to cut some wires and make them longer so they do not get tangled with the tire if it is laid out

i dont have computers and i dont have the stock wheel wells anymore i tack welded a couple tacks on a trailer fender in the front, its all the way up to the hood jam for now until i get it to lay so i can see how high it really has to be , the wheels arent hitting anything nor the tires. just need the truck to get the frame down.

You might have to tub the firewall also.

this is what i had to do to lay on 22's

*tub firewall (or just move it back a few inches)
*tie rod notch
*notch frame for lower control arm (it will hit the frame before you lay out)
*notch lower control arm mount (the lower control arm will hit the mount before you lay out)
*notch upper control arm mount or the uppers themselves (the upper control arm will the mount hit before you lay out)
*relocate the wiring harness connector on the driver side firewall
*modify or remove inner fenders
*relocate or remove coolant overflow tank
*relocate battery or battery mounts
*relocate or remove windshield washer fluid tank
*remove hood springs (will possibly hit)
*drop spindles (of course)

tubular control arms will help alot and keep you from having to notch the frame so much.

I have the ART arms and I still had to notch for them to come up into the frame with 22s along with the tie rods. You will also have to tub the firewal to lay out on 22s. Or at least beat it in a little.