Will this rear setup work??
B
brandon005
+1y
ahhh shit here we go again
B
bagginitdotcom
+1y
Don't run any bars reverse. Redraw it so they all go foward. Just because you see this crap on show trucks doesn't make it right.
C
CRAIGSdime
+1y
On my truck im running top bars reverse and bottom bars forward with bags mounted on bottom bars, my pinion has very if any change all the way up and down, also been on for 1 year with no problems, its all on he say this n that but if it done right its all good.
C
CRAIGSdime
+1y
^very little pinion change if any^
C
CRAIGSdime
+1y
/7
///RELAXED 720
+1y
gravity5
+1y
Run a parrallel 4 link all forward and a watts link, that will work awesome.
M
madmike
+1y
weld the axle to the frame...fuck a link
mindlissmetalfab
+1y
Quick Lesson:
http://www.illconformity.com/videos/linkvideo.wmv
what a lot of people don't realize is the setups like the KP 6 link and SD 5 link that I think are trying to be duplicated with some of the new ideas are still entirely forward link setups. The rear lift bars are mounted on a shackle or dogbone, so they have a double pivot at the axle. That way they can only move it up and down, but do not locate it or effect pinion angle in any way.
http://www.illconformity.com/videos/linkvideo.wmv
what a lot of people don't realize is the setups like the KP 6 link and SD 5 link that I think are trying to be duplicated with some of the new ideas are still entirely forward link setups. The rear lift bars are mounted on a shackle or dogbone, so they have a double pivot at the axle. That way they can only move it up and down, but do not locate it or effect pinion angle in any way.