need pics.. cylinders on an accord (rear)

so i bought an Accoed wagon to drive to work and save the Titan from those miles.

cant drive stock though-- found an air kit (cylinders)used, for cheap, and started to hookit up.wound up making my own brackets for the front, i guess i will have to do the same for the back, but was wonding where would a guy normaly even bolt to? any pics would be great! thanks in advance..........

I dont have any pics, but the mounts that I made for mine were just a U shape that bolted on to the lower arm were the strut used to mount.

i will try an take some pics of the rear of my wagon and post up later...

If these take the same as the regular accord mounts i have a brand new set sitting here. The rears from a project i did 2 weeks ago only need the fronts for another vehicle. And was forced to buy all four they are for the 3/8 cylinders i believe as the cylinders i had were the 22mm mounts... so if you have the smaller 3/8 size cylinder these would work uppers and lowers let me know email me at mazscraper@yahoo.com
i will set you up with a nice price.

off topic a bit, but check out accordwagonclub.com for all your wagon needs.

the rear top plates ( if they are for a 2 or 4 door accord ) are going to have to be cut with a plasma cutter in order to fit the wagon due to the shape of the inner wheelwell...