S
so my frame sucks...
S
scotto79
+1y
took the big step on the weekend, I cut the frame at the firewall, and there was no bottom to the frame, just that piece of 3/8" plate with maybe 1/2" of material holding the plate. My brother measured it in several spots, and there was small twists here and there, so we didn't bother keeping it for measurements. I'll just end up going from the stock measurements from here.
Uncle Fester
+1y
Good luck, loads of work ahead of you.
S
scotto79
+1y
this damn truck has been nothing but loads of work, but thats all too familiar to most people here