Converting to a fuel cell o a dakota.......Need some input

Yeah I can make the billet rings no problem... just let me know and send me the top of the tank so I can get the threads off of it...

what about the sender though....how should i mount that?

if some one can post up some pics id like to see it done !!

I have a Ram wiht a 5.9 i went with the aeromotive a1000 pump and regulator and havent had any problems and running a 20 gal fuel cell.Swithch all to an- fittings and braided hose- then hard line from the pump to engine.

Adam makes threaded adapters to weld onto aluminum fuel cells. Drop your fuel pump onto the adapter and reuse the plastic lock ring.

OK so I have a couple of more questions..... How many outlets do i need on my cell, is one enough or do i need three for a return line. Does the dakota havea return line? And would it be good or bad to get a 12" cell with no sump, compared to a 10" cell with a 2" sump? Right now i am looking at these two cells... (links below) would these two work?
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RCI%2D2191AD&N=700+4294925239+4294839036+400379+4294920243+4294808822+115&autoview=sku
and
http://store.summitracing.com/partdetail.asp?autofilter=1&part=RCI%2D2161AD&N=700+400379+304364+4294903827+115&autoview=sku

adam, how much u chargen for those adapters cause im gonna need one. Might as well get it now while i got the tank out. And what peice do u need off the sending unit sent, the plastic ring?

I charge 100 bucks for the ring... its a nice piece trust me... I need the top of the gas tank... just cut out the top part where it is threaded...