how to schrader valve

is there a fitting i can use to hook up a shcrader valve to 1/4" DOT airline, and if not then how could i hook up a schrader valve to the 1/4"DOT airline? thanks alot!!!

You will need the Shraeder valve(1/4 NPT) a female(both sides) 1/4 NPT coupler and a 1/4 NPT PTC fitting. Take all of the pieces and assemble them with a little teflon tape to seal the fittings and your done. You can now inflate your bags in an emergency.

you need this and a coupler and a 1/4" npt 1/4 tube ptc or compression fitting.

Edited: 1/1/2006 6:43:30 PM by WhyNotFab

You could always use one of these also,



Inflation Valve w/ 1/4" Line Fitting, Nut for mounting somewhere.

Originally posted by WhyNotFab



Edited: 1/1/2006 6:43:30 PM by WhyNotFab

You could always use one of these also,



Inflation Valve w/ 1/4" Line Fitting, Nut for mounting somewhere.

that is a schrader valve, just with a longer shaft that is threaded so you can mount it through something...like behind your tag or something.

so it is really just that easy... thanks alot guys!

Originally posted by low mazda



Originally posted by WhyNotFab



Edited: 1/1/2006 6:43:30 PM by WhyNotFab

You could always use one of these also,



Inflation Valve w/ 1/4" Line Fitting, Nut for mounting somewhere.

that is a schrader valve, just with a longer shaft that is threaded so you can mount it through something...like behind your tag or something.

yep, and ready for 1/4" line.. no coupler/straight needed

now where can i get these items at?????

i order my fittings from O'Reilly's from their Commercial Truck catalog

you can come by the shop justin, we keep them in stock...