watts link?

alright so i really wanna do a watts link. Do I have to do a paralell 4 link or can i just do a 2 link? I herd that a 2 link will work if its bolted to the axle with U bolts?

Edited: 12/29/2005 10:04:39 PM by lascrew

Here's mine with a KP Components 4-link.It was made by Totally Polished.

you can use a watts on a parallel 4 link or a 2 link. either one is fine.

www.builtbybyc.com

oh, and I have 4 in stock now.

Originally posted by DawgsledMazda



you can use a watts on a parallel 4 link or a 2 link. either one is fine.

www.builtbybyc.com

just curious how a watts link works with a 2 link? the way it looks in my mind is that with the articulation of the axle from layed out to full up the watts link would have to twist front to back with the axle to work. maybe im crazy but i dont see it.

chris

Originally posted by lascrew



Edited: 12/29/2005 10:04:39 PM by lascrew

Here's mine with a KP Components 4-link.It was made by Totally Polished.

is that a drag bar off the bottom of your air tanks?

the heim joints with the cone washers allow for plenty of travel for the watts to move with a 2 link.

I can see where a watts with just poly bushings would have trouble handling the extreme pinion angles changes of a 2 link.

No, that is not a drag bar.
LOL.
I didn't know it at the time, but they put that there temporarily as a camera mount so they could make the video of the watts-link in action while driving; for their website.

So in everyones opinion, what gets more articulation...a triangulated 4 link or a parallel 4 link with a watts link?

Use the Totally polished Watts link.... its a superior product and they dont mess around with product deliver...

Articulation... I would have to say a triangulated with hiems joints would get more then the others