valves

run 8 valves truxst me

Originally posted by BIGRIGZ



Originally posted by toadfrog17



Edited: 12/24/2005 7:25:17 PM by toadfrog17



Just put check valves in front or after the fill valves.

I don't know anybody that has a system setup with only 4 valves. I don't know if you have your swaybar on if it will sway or not?

Everybody I know runs at least 8 valves...



The pic i posted is an 8 valve setup

Originally posted by s10soolow



heres what I decided to do what do u think?

well this is what i did but i have a small problem now the 1 dump valve leaks when under presure why is this?

bump

what no comment?

Is the valve itself leaking, or is it leaking at the fitting

the valve itself!!

Assuming the valves are designed to hold your pressure, disassemble it and make sure the poppet isn't scored and there isn't any crap stuck on it or the orifice. Since they are direct acting valves shouldn't be hard to see.

they are brand new never used but il check.

Edited: 12/27/2005 9:01:32 PM by s10soolow

yes this is at li 40 psi in my house not on the truck yet!

ok i took the valve apart and nothing looks bad baut it only does it when its presured from one side I have it hooked up (in: pluged) (cyl: tank) (exh:bag) it doesnt leak. but if i reverse cyl and exh and use as a dump it leaks