WTB Axle pads

I know there is a 1000 buisness's on here. Who has a nice 3" axle pad with a low profile that will bolt to a Slam bag. Laser cut, quality piece?

Dont say Suicide doors, because there's sits up to high, and I dont like it. Pics would help

Edited: 12/10/2005 7:40:45 AM by BagedRanger



here is an example

Not this high, just this quality with a fair price! who has them. I want to support these companies I hear so much good things about and that support this site.

Well, more then likely, most of them will be fairly tall. You need room to be able to get a bolt in from the underside between the axle and the pad. You could check AirRide Technologies, they have a bunch of different universal brackets and stuff. They seem to be a little more expensive, but I guess you could consider the price fair if you dont want to make it yourself and no one else makes them either.

Originally posted by BagedRanger



Edited: 12/10/2005 7:40:45 AM by BagedRanger



here is an example

You'll need a "forever bolt" if you use something that short. You know, install the bolt before you weld the perches on, so you can just spin the bags on and use a box wrench to hold it still and tighten it.

Sucks trying to line up the top bolts if you do that though..

And those are axle pads for leaf springs, the holes are for the pins in leafs. You could use them as bag mounts though..

www.gravity-werx.com mikes are pretty low profile.

Originally posted by Russ-D



Originally posted by BagedRanger



Edited: 12/10/2005 7:40:45 AM by BagedRanger



here is an example

You'll need a "forever bolt" if you use something that short. You know, install the bolt before you weld the perches on, so you can just spin the bags on and use a box wrench to hold it still and tighten it.

Sucks trying to line up the top bolts if you do that though..

And those are axle pads for leaf springs, the holes are for the pins in leafs. You could use them as bag mounts though..

Yea Russ, thats the lower mounts that i have on my sonoma, i had to weld the bolt on from the under side, then weld on the mounts, i think i got em out of a 4wd lift kit or something, but yea they are pads for leaf springs....

here is a link to some bro.... they are 16.99 and look exactly like what i have...good luck

http://www.jackit.com/store/supercart.cgi?s=wrr_200

Found some a few bucks cheaper for you at Speedway Motors:

Here's the link

Ok Im still looking. nobody out there has
a low profile lower bag mount for on top of the axle?