Sanden 708 AC compressor clutches removal (AC clutch)

The Sanden 708 AC compressor clutches on these can be removed without releasing refrigerant.

The AC clutch must be held stationary, and the AC clutch nut removed using a 19mm socket. Of course the AC belt must be off as well.

The loaner tool I got did not fit the Sanden 708 AC clutch, so I had to make my own puller.

I drilled three holes into a large washer and got three 6mm x 1.0mm x 50mm long hex head screws. For the other part, I ground grooves in a washer so that those 6mm screws would have clearance. The