Bagging an 05' Ram

05 Dodge Ram 1/2 ton 4 door

What is all required to lay it out on 22's? Full frame

New tranny xmember im sure.Control arms? Spindles?

with a 22x10 wheel, prolly chrome, will the rearend need narrowed?

frame on a 02+ requires z'in the sub frame 1.5" in turn you can also raise the trans that much with the stock trans x member since it only hangs 1.5 below the frame.

then ditch the stock spring pirches and make some new mounts..

I prefer (MY) ekstensive LCA's with flipped chevy balljoints. lets the subframe lay flat

other then that the gas tank hangs down 2 inch's below the frame rail as well.. people have raised the stock tank mount.. and others ditch em...

when you raise the tranny, do you have to cut up the sheetmetal and raise the tranny cover?

And i have done flipped balljoints on my effie (with custom tubular arms to) so that part should be easy

Thanks for your help