M
body mounts
S
sweetnessmike
+1y
lets see some pics of ur one off body mounts need ideals i dont see how a link bushing is going to insolaute anything with the inner sleeve installed thanks
S
slow50
+1y
Edited: 9/11/2010 8:50:31 PM by ineedatruck
i think a link bushing would work. think of it like the frame would be the link bar welded to the outer sleeve. then the body would be like the tabs bolted to the inner sleeve. if that made sence. prob not the best body mount though.
i think a link bushing would work. think of it like the frame would be the link bar welded to the outer sleeve. then the body would be like the tabs bolted to the inner sleeve. if that made sence. prob not the best body mount though.
S
shortrodeo
+1y
No pics but energy suspension makes a universal body mount that's pretty cool. its a typical 3 piece dresign, comes with the top and bottom part of the bushing, a sleeve and the failer washers. Pretty cheap too like 25 a pair, there real short and very stiff so they work pretty well for the low clearance floors we typically build our trucks with. They sell them at jegs, summit, and ebay. I wouldnt waist my time trying to use link bar bushings there not really made to support anything when you turn them on there side like you would mount a body mount.
Miles
Miles
Uncle Fester
+1y
Late 70s Energy Suspension Jeep bushings, look identical all like hockey pucks. Perfect for sizing and are OEM.