leaning

when i air up my truck its leaning to the drivers side. about and inch. if i measure off the ground to the fender. what do i need to do thanks

plumb up individual controls and or switches and dump the pass side an inch after lifting...that would be the easiest thing to do.

Your gas tank weight is probly causing the lean if it is on the drivers side?..and if you have just  f/b switches..the the easiest way to fix it would be to build a fbss setup so you can conrtol the pressure of each bag..so you can adjust the lean

Mine does it too exactly one inch. so I cut my cups on the passengers side and guess what it's still an inch pffft!