air bags
customforlife
+1y
ok i have an 98 single cab chevy trucki got the air bag cups for the front and they dont have any bolts welded on them or anything.how would i go about mounting them in place?
simple-pleasurez
+1y
you need to have a bolt welded in the top cup.
customforlife
+1y
ok so what about the bottom one
A
alwaysLow101
+1y
top has one long bolt to go through the hole where the shock bolts, and the bottom have to on them, they go through the holes where the shock is bolted in between the coil spring on the lower control arm
customforlife
+1y
ok that makes sense thanks
A
alwaysLow101
+1y
No problem
Balzout Sparkin
+1y
The lowers don't necessarily have to have bolts, it will just sit in place. OR, you could just plate the lower arm and bolt the bag straight to the plate.
bodydropped
+1y
most lowers float aka just sit there so if you jack your truck up it wont hurt the bag as much as it being bolted with no limit straps, if its bolted it can stretch the bag so much it could tear it internally or externally