new rear setup problem advice or suggestions please
132 views
3 replies
4 following
H
new rear setup problem advice or suggestions please
B
bdropn22s
+1y
my new rear setup is about done but when it airs up the axle moves forward are my link bars to short or can anyone see whats causing the problem? before i tear back into it...
TwistedMinis
+1y
It looks like your bars are parallel to the ground or pointing up when laid out. They should be like that at ride height. Laid out they should be angled down a bit, and full lift they should angle up a bit. That way there is a happy medium with axle movement.
You should probably also ditch the 90 degree pipe bends. They aren't all that strong.
You should probably also ditch the 90 degree pipe bends. They aren't all that strong.
V
VtecCrx
+1y
Originally posted by TwistedMinis
It looks like your bars are parallel to the ground or pointing up when laid out. They should be like that at ride height. Laid out they should be angled down a bit, and full lift they should angle up a bit. That way there is a happy medium with axle movement.
You should probably also ditch the 90 degree pipe bends. They aren't all that strong.
Exactly. Just look at the upper wishbone. Since when it is layed out, it is straight, once it starts to lift it is going to push the axle forward........
It looks like your bars are parallel to the ground or pointing up when laid out. They should be like that at ride height. Laid out they should be angled down a bit, and full lift they should angle up a bit. That way there is a happy medium with axle movement.
You should probably also ditch the 90 degree pipe bends. They aren't all that strong.
Exactly. Just look at the upper wishbone. Since when it is layed out, it is straight, once it starts to lift it is going to push the axle forward........
drgginisuzu92
+1y
what they said had same problem