wishbone 3 link question

I bought a wishbone 3 link for my truck and the two lower bars are longer than the upper wishbone. Will I run into any problems here? I always thought that the uppers and lowers had to be the same length.

Thanks for any help.

There is nothing wrong with unequal length upper and lower bars.

cool thanks, just wanted to make sure before I got too far ahead of myself and started running into problems. I thought I read that the bars should be the same length but I wasn't sure.

by running the upper bars slightly shorter than your lowers, this allows your pinion angle to change through the movement of your suspension. some people say you dont want pinion change, but thats to an extent. i always run the uppers an inch or so shorter than my lowers and ive never had any problems