driveshaft question
soccorjimmy
+1y
Well one day my carrier bearing decided to pop out and my driveshaft started making a clunking noise, looked under the truck and saw that the bearing was pushed out. I got the bearing fixed and now all of a sudden I am getting a vibration problem around 35-45mph and little around 75. Was not like that before. Took it back to the shop and had them check the u joints. My guy told me they were fine. Could the dirveshaft be out a balance? Is there anyhting else I missed? Thanks for any help. JIMMY
suckafree
+1y
if the u-joints checked out good, and your pinion angle is right, and the carrier bearing is good. Then yes I would have the driveshaft balanced.
bodydropped85
+1y
OR you need to rotate the rear shaft on the front shaft, should have marked them b4 you took them apart. id have the whole assembly balanced.
soccorjimmy
+1y
I had the shop do it so i figured everything would be fine. JIMMY