valves?

So I'm finally at the spot to look for valves, I'm probably going to run ASCO 1/2", and was wondering about running either 4 or 8? I want to run just front and back, but would I use 1 for fill and 1 for dump and how is that plumbed in?

I run 8 valves when ever possible. It is better for cornering.

yep you have to think. if you run 4 valves and you push on one side all the air is going to go to the other side bag. rock like a mofo

ok thanks, so does 1 valve plumb into the other? Or wheres a site to get a good diagram at?

At least run 6. Thats how many I have. Just put the front on individuals and you can run the back together and still get a good ride.

Originally posted by minitrukinranger



At least run 6. Thats how many I have. Just put the front on individuals and you can run the back together and still get a good ride.yep...what he said...minimal of 6 to stabilize itfront2 fill 2 dumprear1 fill 1 dump

Go to AIM's website. They have a pretty good foolproof diagram. After looking at that, you'll have a better understanding and you can change it up from there. Search the other forums too. I know I've recently posted that diagram.

Thanks everyone, I'm just getting my Ranger rearend today, then the back is getting bagged this weekend if the brackets come in time.