fuel cell,stock fuel pump, PLEASE HELP!!

hey guys sorry about the long post but im needing to put a fuel cell in my truck its a 01 silverado wit 4.8 engine and im using my stock fuel pump in the cell, so im running a LS1 intake for clearence issues instead of the stock 4.8 silverado intake and on the LS1 intakes fuel rail it just has supply line no return so what im asking is what do i do wit the return line coming out of my stock fuel pump?..and the other port that comes out the fuel pump?..PLEASE HELP THANKS!

you should be able to dump it right back into you r tank

the ls1 has a fuel pump psi regulator in the tank, you would need that pump assembly or an aftermarket regulator

so my best bet would be to run a camaro or corvette LS1 fuel pump or just run a inline fuel pump with a pressure regulator?

either one, im not 100% sure but i think the earlier model ls1 engines actually had a regulator that was on the rail with a return, you could go with that injector rail, personally id go with this a1000-6 aeromotive regulator, i have this for my grand prix

https://www.jegs.com/webapp/wcs/stores/servlet/product2_10001_10002_750083_-1