no spark C1500

533 views
15 replies
10 following
bmx_king911@hotmail.com's avatar
no spark C1500
Dustins10's avatar
Dustins10
+1y
i have a 94' chevy c1500 and its not getting any spark i put a new MSD Blaster GM Coil and a Accel ignition control module and MSD Distributor Cap and Rotor and still nothing anyone got any ideas for me???? its a 5.7 350 tbi thanks
S
SHOWTIME
+1y
NOT TRYING TO BE A D--K BUT DID YOU HAVE SPARK BEFORE THE INGNITION UPGRADE
Dustins10's avatar
Dustins10
+1y
no thats why i got it all
PleasuresBurban's avatar
PleasuresBurban
+1y
Um is the distributer turning at all? Just a suggestion...hopefully your timing chain didnt snap.
S
SHOWTIME
+1y
WHAT WRE YOU DOING WHEN IT QUIT OR DID IT JUST NOT START ONE DAY
Dustins10's avatar
Dustins10
+1y
i started it up and it ran for about a 15sec and then it stoped and wouldnt start again
mmautoworks's avatar
mmautoworks
+1y
PULL YOUR DIST CAP AND MAKE SURE YOUR ROTOR IS TURNING IF NOT TIMING CHAIN OR DIST GEAR IF IT IS TURNING CHECK FOR POWER TO THE COIL GET A WIRING DIAGRAM AND FOLLOW YOUR POWERS AND GROUNDS CHECK ALL
Dustins10's avatar
Dustins10
+1y
ya its turning i just went out and looked
S
SHOWTIME
+1y
are you getting spark at the plug?to check pull the plug from cyl #1 and hook it up to the spark plug wire and hold the plug so that it is touching a pc of the motor if you got spark there then it maybe the fuel pump took a crap.did you remove the dist? if you did are you maybe 180 degrees out
mmautoworks's avatar
mmautoworks
+1y
MY STATEMENT WAS ASSUMING THAT YOU ARE NOT GETTING SPARK ANYWERE IF YOUR COIL IS PRODUCING A SPARK YOU NEED TO CHECK YOUR CAP AND WIRES AND IF YOU ARE GETTING SPARK TO THE PLUGS LIKE LONGNLOW SAID CHECK FOR FUEL PRESSURE