need some help

i have 2 15inch solo baric L7s and im gonna use a 600 watt directed amp till i get my new amp. question is will i fry my amp tryin to push these? i know im not gonna get everything out of the subs but i love this amp and dont want to fry it.

as long as you dont exceed the impeadance level the amp is stable to

well here is the specs on the amp and the subs are 4 ohms

"CLASS D AMPLIFIER 275w RMS into 4 ohm,

i dont trust anything that comes from the directed line to go one ohm. The subs are def way too much for that amp so i would say run it at 2ohms at a decent level and realize you need atleast 1000 watts rms to get those puppies to play good

im just usin this amp temporarily till my other am comes in. i ordered a u.s. amp. its 2500 watts at 2 ohms so im gonna run it till it comes in.

what ohms r ur subs

the subs are 4 ohms

well u can't wire ur subs in 2ohms only 1 or 4 ohms

Kyle Directed amps will go to 1 ohm without any problems.. they are made to handle it. people who have problems with amps usually didnt install them right.

Originally posted by ShakinPlates



i dont trust anything that comes from the directed line to go one ohm. The subs are def way too much for that amp so i would say run it at 2ohms at a decent level and realize you need atleast 1000 watts rms to get those puppies to play good