when I lay my truck out it it will hit the slave cylinder. I need help has anyone went through this issue on a 95 Sonoma it sucks
ya dood, ur gonna have to raise it up and angle it. You got 20s? or what? Basically u just unbolt it n shit and cut out a new hole higher up in the firewall and then u remount it there and angle it up so it dont rub no mo... theres an issue of StreetTrucks 2 issues ago i think that has a whole tech article on how to lay with 20s on a S10...bagged not bodydropped
the streettrucks issue has a purple bagged and BD dually on the cover
You mean the master cylinder? The slave cylinder is on the tranny. You'll either have to raise it up, or recess it somehow to get it out of the way.
the slave cylinder on 95 S10 4.3/5spds hangs below the frame. Not much you can do besides make sure you motor mounts are good, space them up a hair, or change the transmission out for a newer one.
Originally posted by david49910
the slave cylinder on 95 S10 4.3/5spds hangs below the frame. Not much you can do besides make sure you motor mounts are good, space them up a hair, or change the transmission out for a newer one.
Man I'm gettin' old, I forgot about that on S-10's. I haven't worked on a 2nd gen 5spd since my '95 back in 2000....
does the 2.2L run into this issue too??